Obtain data for Tag and cables from the discipline based on info from Aveva Engineering

– Map the material to correct purchase package (PWBS) and storage location (PWBS)

– Maintenance when needed (new material)

– Responsible engineer for multidiscipline requisitioning based on input from the various discipline incl registration in EIS and transfer to SAP

– Responsible engineer for reservation (from EIS til SAP) incl collecton of reservation data from 3D og MTS

– Follow-up badlist (C&S request etc.)

– Follow-up reservation badlist.

Qualifications:–

Bachelor Degree or equivalent with at least 5 years of experience in the Oil & gas Industry

– Participation in EPCIC projects

– Excellent knowledge of Norsok standards.

– Previous experience with Equinor procedures and standards.

– Previous experience with Aibel’s systems EIS, Proarc (highly preferable)

– Must have valid Norwegian offshore- and health certificates..

Location: Stavanger

ID: HQ00008416

Draftsman 

– Generate clear and accurate P&IDs, Process and PFDs in accordance with company work instructions, P&ID legend and standards

– Ensure that the requirements defined in the work instructions are followed

– Assist in the development and maintenance of Company graphical standards and symbols directed by Company

– Extract, plot and deliver drawings for review and issuance to the engineers as defined in the work instructions 

Qualifications:

– Basic understanding of Process Engineering P&IDs (Piping & Instrument Diagram) and PFDs/UFD (Process / Utility Flow Diagrams)

– Min 5 years’ experience with drawing P&ID`s in MicroStation- experience with document handling system IFS is preferable- Technical College 

Location:Stavanger

Lead Project Engineer 

– Support the Project Manager in the safe delivery of projects in accordance with stakeholder expectations.

– Lead the work related to the temporary living quarters through the Select, Improve and Execute phases.

– Delivery of Company’s Internal Governance documentation required for Decision Gates.

– Delivery of documentation to support communication with Authorities.

– Management of contractors/ alliance partners- Contribute to management of stakeholders- Implementation of risk management processes

– Implementation of processes for continuous improvement and experience transfer/ organizational learning

– Lead Technical Evaluations of tenders. 

Qualifications:

– Technical education to University level

– 10 years experience of planning and executing offshore projects.

– Experience including working with floatel/ jacktel contractors is an advantage. 

Location:Stavanger

ID: HQ00008397

Crude Revenue Accountant 

– Responsible for crude invoicing process. Liaison with Commercial and external customers

– Calculate over -/ underlift values for accounting and tax

– Review of freight costs according to contract   

– Review of accounting treatment of various crude commercial arrangements- Perform price and volume analysis

– Various crude reporting including Ministry of Energy

– Support NxtGen ERP SME

– Process and execute business improvement initiatives.   

– Ensure that all financial transactions are properly documented, recorded and reported 

Qualifications:

– Minimum Bachelor’s Degree in Accounting or Finance

– Good knowledge of USGAAP accounting rules

– System & analytical skills with a practical approach to problem solving

– Display initiative, plan and control own work within scheduled deadlines

– Structured, accurate, and cost focused

– Strong English communication skills written and verbally

– Strong communicator and presentation skills

– 7 years or more of direct finance-related experience

– Understanding of oil and gas business operations

– Knowledge of accounting rules and regulations for NGAAP and Tax

– Good knowledge of SAP, MS Office programs and analytics software’s

 Location:Stavanger

ID: HQ00008402

Structural Engineer PDMS 

– Perform PDMS structural design, including 2D draft work, of main and secondary outfitting structures as  (but not limited to):

– Deck structures- Reinforcements of existing steel- Walkways- Access platforms

– Stairs & ladders- Monorails & pad eyes

– Update existing drawings using Microstation 2D/Raster.

– Work with point clouds/scan in PDMS.

– The candidate should be responsible for (but not limited to):

– Preparing structural design solutions i.e. be able to define the design and act as a Discipline Responsible Engineer.

– Reporting of status / progress of own work to Team Lead on a regular basis.

– Ensure quality and self-check of own and others work performed. 

Qualifications:

– Master/Bachelor degree or equivalent experience in structural engineering

– Long experience, minimum 5-10 years, within structural design (PDMS) for offshore modification (NCS).

– Experience as a Discipline Responsible Engineer (DRE) – preferable.

– Experience from offshore surveys – preferable

.- Understanding design of secondary outfitting structures.

– NORSOK-standards.\

– Previous participation in FEED studies and EPCIC projects.

– Previous experience with Equinor procedures and standards – preferable.

– Experience with MS Office standard software.- English language written and spoken.

Location:Stavanger

ID: HQ00008405

– Review and analyse purchase requisitions for completeness and accuracy, and source the supply of materials/service from existing contract portfolio or establishes new sourcing relationship(s).- Determine the method of sourcing – be it competitive bidding or via priced Frame Agreements.- Prepare bid specifications, issue bid requests and review quotations and purchase.- Identify and select supplier to procure requisitioned commodities, meeting criteria such as price, quantity, quality and delivery date and places orders.- Understand requesting departments needs and develop/refine specifications and/or source for materials/services in conjunction with Contract Advisors or Procurement Managers – whilst working to achieve lowest possible total cost of ownership (TCO)- Process purchasing transactions according to policies, procedures and processes.- Manage delivery of material and services in accordance with expectations, and expedite delivery on a non-routine basis in agreement with the internal client.- Manage purchasing performance in accordance with KPIs and targets set by the Purchasing Manager.- Resolves purchasing problems between department and vendor in a service minded and solution orientated manner .- Interprets purchasing procedures for Internal clients and external vendors, sometimes as a specialist in assigned material categories, which require a degree of technical knowledge. Assists personnel with making requisitions, and helps to solve procurement problems.- Champions compliance with established procurement processes out in the BUs.- Provide guidance and assistance to Purchasers.- Be familiar with company’s contract portfolio within segment.  – Follow up of Contracts/suppliers as agreed with Purchasing Manager and in the context of the Management of Contract procedure.- Work with Purchasing Manager to develop purchasing plan 

Qualifications:– BSc in SCM or equivalent experience- Experience within procurement/purchasing as Buyer minimum 5 year- Experience from supplier/customer side- Relevant experience from purchasing in a range of typical O&G category equipment or services .- Plan and follow up Vendor/Contract administration- Highly skilled in SAP  – Well-founded knowledge of industry purchasing practices and procedures.- Well-founded knowledge of relevant types of materials, products, and services for the assigned areas of Procurement and how to source these for use at the appropriate locations.- Preparation of specifications and assessment of simple bids.- Well- founded knowledge of material management, warehouse operations and logistics within Companys ERP tool.- Experienced in Continuous improvement

– Produce new documentation and drawings such as Cauce&Effect, System Control Diagrams (SCD) diagrams, loop drawings for process, Fire&Gas and safety systems; IS Loop Calculations.- Revise existing documentation and drawings.- Produce work packages for installation.- Produce deliverables for studies and Front End Loading (FEL) work.- Produce documentation for Safety and Automation Systems (SAS)- Discipline check and approval of produced documents and drawings in the project.- Order all instrument materials needed for offshore installation.- Must be able to understand P&IDs and drawings from different disciplines.- Discussions with Client and vendor representatives in order to find optimal technical solutions.

Qualifications:– Bachelor or Masters degree in Instrumentation/Automation- Good experience with SAS systems in modification projects.- Experience with compressor modification projects.- Experience with Kongsberg SAS systems is preferred- Long experience, 7 to 12 years, within offshore related projects- Knowledge of relevant standards such as NPD, ATEX, IEC61892 and Norsok- Knowledge of modifications on offshore installations when in operation.- Experienced in Studies and Front End Loading (FEL) work.- Experienced in several process & utility systems, incl. Platform Control Systems, Fire&Gas and safety system.- Knowledge of instrument and electrical equipment used in the oil industry.- Knowledge of the differences in using hydraulic, pneumatic or electrical solutions in safety systems

Functional Safety Engineer- SIF determination and SIL allocation- Prepare / update Safety requirement Specification (SRS)- Review of vendor SAR’s and SIL certificates- Perform SIL compliance calculation and assessmentQualifications:– Bachelor’s/Master’s degree in Safety Engineering- Preferable TÛV certified functional Safety Engineer- Min. 5 years’ experience in Functional Safety / SIL engineering- Experience with IEC 61508/61511 and Norsk Olje og Gass Guideline 070- Knowledge of SIS/SIL and process safety design- Experience from modification projects in the oil and gas industry would be an asset.- Have good communication skills in English and Norwegian(preferable) both orally and in writing- Have a cooperative working attitude- Be systematic and accurate- Have a high loyalty to deadline and quality requirements- Have the ability to see multiple design – cases (solution oriented)

Location: StavangerID: HQ00008325

Draughts person/CAD Designer – 3D modeling and fabrication drawings- 0-5 years of relevant experience- Story board and visualization of operations- Rigging and lifting sketches Qualifications:– Relevant experience as draftsman is preferred- Experience with Inventor, AutoCAD, is preferred Location:Stavanger

Structures/Design Senior Project Engineer– Investigate to ensure that all engineering meets the requirements of all appropriate codes, regulations and standards- Perform Structural calculations/Design work as requested by Projects- Perform concept evaluation and give guidance to Projects based on relevant discipline standards and best practices- Continously seek to improve and develop discipline to a higher standard- Perform structural analyses- Participate in design and procurement of tools/structures- Follow up fabrication of tools/structures- Perform tasks according to requirements from Projects- Give guidance during planning of offshore operations- Prepare animation and 3D drawings as requested by Projects- Ensure Projects receive sufficient documentation and updated on progress- Preparation and delivery of relevant project documentation and reports as requested by Projects- Take ownership and continuously seek to improve 

Qualifications:– Higher Education Degree/Master/Bachelor (or equivalent) in related engineering or science subject. preferably within marine or mechanical engineering- Minimum 5 years relevant in industry related role- Experience with subsea structures, modules, flexibles, risers and/or umbilicals- Experience with ROV and subsea operations- Experience within mechanical and structural design/static and dynamic analysis/animation and 3D drawing- Familiar with STAAD, ANSYS, MathCad, Inventor and AutoCad